November 20, 2026
Supported by our ISO 9001:2015 and AS9100:2016 certifications, we offer several non-destructive testing capabilities to review and verify casting integrity, dimensional accuracy, and overall quality. From internal X-ray inspection to advanced 3D scanning, these methods provide valuable information throughout the production process. These non-destructive testing methods fulfill different roles, but the information they reveal could be crucial for the customer.
1. X-Ray Inspection
Our in-house X-ray inspection capabilities allow us to examine the internal structure of an aluminum casting without cutting into or damaging the component. This method helps identify internal defects that appear below the surface.Much like a traditional X-ray, radiation passes through the casting and produces an image based on differences in material density. Areas containing internal porosity, shrinkage or inclusions appear differently from the surrounding aluminum, allowing technicians to identify potential defects.
Having X-ray capabilities in-house means inspection results can be reviewed quickly. If recurring defects are identified, the findings can help us pinpoint underlying issues during the casting process. The information can also help us understand the need for pattern revisions or changes to gating and feeding systems to improve future production.
X-ray inspection is particularly valuable for critical or pressure-bearing components, first article inspections and production sampling plans. For applications where internal casting integrity is important, radiographic testing provides an additional level of verification before a component moves further through manufacturing.
2. Dye Penetrant Testing
While X-ray inspection focuses on internal casting conditions, dye penetrant testing identifies defects that extend to the surface. This method is commonly used to locate cracks and surface porosity that may not be visible during a standard visual inspection.The process begins with thoroughly cleaning the casting to remove contaminants. A liquid penetrant is then applied to the surface and allowed time to enter any openings or defects. After the excess penetrant is removed, a developer is applied to draw the remaining penetrant out of those openings. This makes surface defects easier to identify.
Dye penetrant testing is a relatively quick and cost-effective method for evaluating surface conditions. However, the process cannot identify defects that remain completely beneath the surface. For a more complete assessment, dye penetrant testing can be paired with X-ray inspection to evaluate both internal and external casting conditions.
3. Leak Testing
For aluminum castings used in fluid-handling systems, pump assemblies and sealed enclosures, identifying defects is only part of the equation. Manufacturers also need to verify that a finished component can hold the required pressure or maintain a vacuum without leaking.Leak testing evaluates whether a casting allows air or liquid to escape through internal pores or other openings. Depending on the application and required specifications, testing may involve introducing pressurized air into a component and monitoring for pressure loss. Another approach uses a vacuum to identify whether air enters a sealed component where it should not. Some applications also use immersion testing, where a pressurized part is placed in water and technicians look for escaping air bubbles.
Leak testing is particularly important for pump housings, fluid-handling components, and sealed equipment enclosures. It is also worth considering after machining. Machining can expose previously closed pores beneath the casting surface, creating leak paths that were not present or detectable before material was removed.
X-ray inspection and leak testing serve different but complementary purposes. X-ray can identify the location and extent of internal voids, while leak testing determines whether those conditions create a functional problem. Combining the two methods provides a better overall picture of the castings’ conditions.
4. 3D Scanning
Unlike X-ray, dye penetrant and leak testing, 3D scanning is not designed to identify material defects. Instead, this technology provides a detailed evaluation of a casting's dimensions and overall geometry.Using a handheld or automated scanner, technicians capture the surface geometry of a casting and compare the resulting digital model against the original CAD design. The comparison identifies dimensional variations and highlights areas where the physical part differs from the intended design.
At Harmony Castings, we utilize a FARO Arm handheld scanner and a Creaform Metrascan-R Black Elite+ automated scanning system, capable of an accuracy of up to 25 microns. These technologies allow us to evaluate complex geometries with extreme precision.
3D scanning is particularly useful during first article validation, tracking dimensional changes over time, and confirming the dimensional accuracy before machining. The color-coded deviation reports make dimensional differences easy to interpret and provide clear documentation for customers. This information can also help our engineering team identify necessary pattern revisions more efficiently.
For customers, the benefits include detailed, accurate casting dimensions and documented results that meet the quality requirements throughout production.
Consistent aluminum casting quality depends on having the right inspection methods throughout production. With X-ray inspection, dye penetrant testing, leak testing, and advanced 3D scanning, Harmony Castings helps customers evaluate the dimensional accuracy and overall quality of the casting. Each method serves a different purpose, but all share one goal: producing repeatable, documented quality that meets customer specifications. Whether your project requires detailed dimensional verification or additional testing for critical components, our team can help determine the right approach.
Although inspection and testing are essential to verifying casting quality, preventing defects begins long before the first part is produced. At Harmony Castings, our engineering team works with customers during the design and development stages to identify potential manufacturing challenges. Our unique V-Process casting method offers a wide range of design benefits, including zero-degree draft, thin walls, and more.
For additional guidance in designing for the V-Process, explore our Technical Design Guide. This resource offers additional insight into the capabilities of the V-Process and design tips.
Have questions about inspection requirements for your next aluminum casting project? Talk with an Engineer or Request a Quote to discuss your application with Harmony Castings.